SKU: SNG2-9+EG-EGW Category: Tag:

Ethernet Gateway

$476.85 ex. GST

The Sense IoT Ethernet gateway allows your Sense IoT Wireless Sensors to communicate with the Sense IoT Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the Sense IoT online system. The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port.

Other Features

  • AC power supply (POE version also available)
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface
  • FCC, IC and CE certified
  • Range may vary depending on environment

What's in the box

  • Ethernet Gateway
  • High Gain Antenna
  • Power Supply
  • Ethernet Cable
  • Ethernet Gateway Quick Start Guide

Suggested Application

  • Transmits sensor data to the Sense IoT online sensor monitoring portal
  • Commercial monitoring applications
  • Facilities monitoring
  • Small business monitoring
  • Large business monitoring

Ethernet Gateway Specifications

  • Product Code: MNG2-9+EG-EGW
  • Dimensions: 139.9mm x 101.8mm x 35mm
  • Storage Temperature: -20ºC to +85ºC
  • Enclosure Materials: ABS plastic
  • LED Lights: H/W Status, Sense IoT Connection Status, Sensor Data Activity
  • Operating Temperature: -10ºC to +70ºC
  • Device Memory: 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
  • Hardware: 10/100 Ethernet Controller
  • IEEE Standard Compliance: 802.3-2002
  • Operation: Full and Half Duplex
  • Cross-over Correction: Automatic MDI/MDI-X
  • Addressing: Pre-programmed MAC Address
  • Host Address: t1.sensorsgateway.com
  • Default Port: 3000
  • Protocols Supported: UDP, DHCP, TCP, SNMP. Modbus
  • Cable Connector: CAT 5
  • Power Supply: 5.5 V AC Adapter | Power-over-ethernet option required standard PoE (802.3AF) Class 1 capable power injector (not included)

433 MHz Specification

  • Operating Frequency: 433 MHz Operating Frequency
  • Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
  • Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
  • Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)